• Radio Replacement

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus

RP4-GM32

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus

$219.95

RP4-GM32

New product

LAN 29 2012-2013 PU/SUV w/NAV

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus View larger
RP4-GM32 Instruction Manual
 Download (546.21k)

RP4-GM32

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.2.3a.8 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.2.3a.4 (Released on May 29th, 2013)
    Release Notes
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.2a (Released on December 21st, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download