• Firmware Update Center

Thank you for choosing PAC as your integration solution.

Follow the steps outlined under your product to update firmware on your interface.

This will ensure optimal performance and latest features for your interface while enabling it to work in the latest vehicle applications.

This process is intended to be performed by an authorized dealer only.

**Note: Software to install firmware is not compatible with Windows 8 or Mac operating systems**

Select a Product

AP4-CH21

AmpPRO 4

Installation Instructions

  • Download the latest version of the AmpPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the AmpPRO PC Application, run and install “amppro_setup.exe”. This will install the PC Application onto the computer. The AmpPRO program will then install the update files from the computer to the interface.
  2. Open the AmpPRO PC Application using the new shortcut created on your desktop.
  3. Connect the interface to the computer using a standard to micro USB cable.
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version V12 (Released on August 11th, 2017)
    Release Notes
    • Adds “Two Channel Mode” on Dip1
    • Reduces audio delay from ~14ms to ~1ms
    • Fixes missing Bluetooth audio when radio is turned off
    Download
  • Firmware Download, Version V9 (Released on January 27th, 2017)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V10 (Released on June 27th, 2017)
    Release Notes
    AmpPRO PC Application
    Download

AP4-CH31

AmpPRO 4

Installation Instructions

  • Download the latest version of the AmpPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the AmpPROPC Application, run and install “ampproexe”. This will install the PC Application onto the computer. The AmpPRO program will then install the update files from the computer to the interface.
  2. Open the AmpPROPC Application using the new shortcut created on your desktop.
  3. Connect the interface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version V3 (Released on August 11th, 2017)
    Release Notes
    • Adds “Two Channel Mode” on Dip1
    • Reduces audio delay from ~14ms to ~1ms
    Download
  • Firmware Download, Version V1 (Released on February 2nd, 2017)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V10 (Released on June 27th, 2017)
    Release Notes
    AmpPRO PC Application
    Download

AP4-CH41

AmpPRO 4

Installation Instructions

  • Download the latest version of the AmpPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the AmpPROPC Application, run and install “ampproexe”. This will install the PC Application onto the computer. The AmpPRO program will then install the update files from the computer to the interface.
  2. Open the AmpPROPC Application using the new shortcut created on your desktop.
  3. Connect the interface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version V9 (Released on August 11th, 2017)
    Release Notes
    • Adds “Two Channel Mode” on Dip1
    • Fixes issues seen with Blind Spot and Collision warning chimes 
    • Reduces audio delay from ~14ms to ~1ms
    Download
  • Firmware Download, Version V7 (Released on March 14th, 2017)
    Release Notes
    • Fixes issue found where front park sense chimes were not being retained when using TOSLINK output in Ram trucks.
    • Fixes issue where the EQ values were not being refreshed after coming out of sleep mode.
    Download
  • Firmware Download, Version V6 (Released on February 14th, 2017)
    Release Notes
    • Fixes an issue found where some voice prompts were inconsistent
    Download
  • Firmware Download, Version V5 (Released on January 27th, 2017)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V10 (Released on June 27th, 2017)
    Release Notes
    AmpPRO PC Application
    Download

AP4-FD21

AmpPRO 4

Installation Instructions

  • Download the latest version of the AmpPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the AmpPROPC Application, run and install “ampproexe”. This will install the PC Application onto the computer. The AmpPRO program will then install the update files from the computer to the interface.
  2. Open the AmpPROPC Application using the new shortcut created on your desktop.
  3. Connect the interface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version V14 (Released on August 11th, 2017)
    Release Notes
    • Adds “Two Channel Mode” on Dip1
    • Reduces audio delay from ~14ms to ~1ms
    Download
  • Firmware Download, Version V11 (Released on March 16th, 2017)
    Release Notes
    Fixes issue with Rear Cross Path Detection Chime not working
    Download
  • Firmware Download, Version V9 (Released on January 27th, 2017)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V10 (Released on June 27th, 2017)
    Release Notes
    AmpPRO PC Application
    Download

BCI-CH21

Backup Camera/Navigation Unlock Interface

Installation Instructions

  • Download the latest version of the BCI PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the BCIPC Application, run and install “bciexe”. This will install the PC Application onto the computer. The BCI program will then install the update files from the computer to the interface.
  2. Open the BCIPC Application using the new shortcut created on your desktop.
  3. Connect the BCIinterface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 1.1.1.9 (Released on June 28th, 2017)
    Release Notes

    New Features

    -Added BCI App support for:

    ---Front Camera Control

    ---Rear Camera Control

    ---Programmable Outputs 1, 2, 3

    ---New programmable outputs provide control of other accessories

    -Added “On-Demand Activation”

    -Added a reset, push and hold for 5s

    -Updated LED Operation

    Fixes

    -Audio cutting out when manually activating reverse camera when using Uconnect “USB, BT” to listen to audio

    Download
  • Firmware Download, Version 1.1.1.6 (Released on September 1st, 2016)
    Release Notes
    Adds VS41 support for Blind Spot and Front Cameras
    Download
  • Firmware Download, Version 1.1.2 (Released on August 10th, 2015)
    Release Notes
    Initial Release
    Download
  • Utility/Other, Version V5 (Released on June 28th, 2017)
    Release Notes
    BCI PC Application
    Download

BCI-CH41

Backup Camera/Navigation Unlock Interface

Installation Instructions

  • Download the latest version of the BCI PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the BCIPC Application, run and install “bciexe”. This will install the PC Application onto the computer. The BCI program will then install the update files from the computer to the interface.
  2. Open the BCIPC Application using the new shortcut created on your desktop.
  3. Connect the BCIinterface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 14 (Released on August 1st, 2017)
    Release Notes

    -Added BCI App support for:

    ---Front Camera Control

    ---Blind Spot Camera Control

    ---Programmable Outputs 1, 2, 3

    ---Swap Source and Preset SWC

    ---Swap Track and Volume SWC

    ---Remote Start Restore Climate

    ---ECO Memory

    ---Start Stop Memory

    ---Preset EQ

    ---Sport Mode Memory

    -Added support for On-Demand Activation (Requires v3 Harness)

    Fixes:

    -Front camera on by park assist not working in 2017 Grand Cherokee

    -Programming Reverse Camera in 2017 Challenger, Charger and 300

    -User options not being saved when trying to save to the initial default values

    Download
  • Firmware Download, Version 9 (Released on February 16th, 2016)
    Release Notes
    Initial Release
    Download
  • Utility/Other, Version V5 (Released on June 28th, 2017)
    Release Notes
    BCI PC Application
    Download

BCI-FD21

Backup Camera Interface with Camera Switcher

Overview

This process requires a thumb drive, formatted to FAT32, a specific firmware file, and access to the BCI-FD21 module. Through the steps outlined below, you can update the firmware on the module to the most current revision

Pre-Update Preparation

  1. Use a PC to format a USB thumb drive using FAT32 file system (default setting).
  2. Download the latest version of firmware.
  3. RIGHT-CLICK and select "Save link as..."
  4. Extract the firmware file from the .zip file that was just downloaded.
  5. Load the firmware file (FT_RCFM.faa) onto the root of a thumb drive.
  6. Note: The file name must remain exactly FT_RCFM.faa Any additional characters (i.e. FT_RCFM(1).faa) will prevent the successful update of the module.
  7. Note the current DIP switch configuration. The DIP switches will need to be returned to this configuration after the firmware update is complete.

Firmware Update Process

  1. Disconnect the BCI-FD21 module from the vehicle harness
  2. Set the DIP switches according the diagram below

  3. Insert the thumb drive with firmware file into the module’s USB port.
  4. Connect the BCI-FD21 module to the vehicle harness.
  5. The update will begin at this time.
  6. While the module is updating the firmware from the USB port, the LED will flash purple.
    DO NOT REMOVE THE USB DRIVE UNTIL THIS LED STOPS FLASHING.
  7. When the LED stops flashing, the update process is complete.
  8. Remove the BCI-FD21 module from the vehicle harness.
  9. Remove the USB thumb drive.
  10. Reset the DIP switches to the appropriate configuration for your installation. (Noted earlier).
  11. Connect the BCI-FD21 module to the vehicle harness, and verify proper operation.
  • Firmware Download, Version v1.3 (Released on March 7th, 2017)
    Release Notes
    • Fixes reverse camera activation in manual transmission vehicles such as Mustang and Focus.
    • Changes function of DIP 4 in Camera Input Configuration table to affect video display function when forcing view of rear camera while in motion.
    1. ON Position: The OE Rear Camera Display will return to Radio Function Screen when vehicles reaches 7mph. This setting is recommended for vehicles that shut down the 12V power supply to the OE rear camera over 7mph.
    2. OFF Position: You can force and watch the rear camera over 7mph at any time. Recommended for vehicles that do not shut down the 12V power supply to the OE rear camera over 7mph.
    Smooths video transition from one source to another in vehicles with OE parking sensor graphical display.
    Download
  • Firmware Download, Version v1.2 (Released on February 7th, 2017)
    Release Notes
    • Adds support for PTBA (Pro Trailer Back-up Assist) in newer Ford vehicles.
    Download
  • Firmware Download, Version v1.1 (Released on July 29th, 2016)
    Release Notes
    • Initial Release
    Download

ISFD531

DuaLink Kit for Select Ford, Lincoln, Mercury Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISFD571

GateWay Kit for Ford

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM12

GateWay SAT - Sirius XM GM

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM531

DuaLink Kit for Select GM Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM533

DuaLink Kit for Select GM Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM535

DuaLink Kit for Select GM Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM571

GateWay Kit for Select GM

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM572

GateWay Kit for Select GM

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM573

GateWay Kit for Select GM

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM574

GateWay Kit for Select GM Cadillac

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM575

GateWay Kit for Select GM

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISGM651

CONNECT FOR SELECT GM 29-BIT LAN

Installation Instructions

  • Save the .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to update your iSimple Connect.
  • Firmware Download, Version 192a.46a (Released on May 5th, 2014)
    Release Notes
    • Resolves intermittent audio issue seen when used with SXV200 tuner
    Download
  • Firmware Download, Version 187a.45d (Released on March 22nd, 2013)
    Release Notes
    • Adds Honda/Acura applications
    • Improves Bluetooth HFP audio
    • Fixes Satellite Radio bleedthrough
    • Improves general functionality
    Download

ISGM652

Connect for Select GM 11 BIT Vehicles

Installation Instructions

  • Save the .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to update your iSimple Connect.
  • Firmware Download, Version 192a.46a (Released on May 5th, 2014)
    Release Notes
    • Resolves intermittent audio issue seen when used with SXV200 tuner
    Download
  • Firmware Download, Version 187a.45d (Released on March 22nd, 2013)
    Release Notes
    • Adds Honda/Acura applications
    • Improves Bluetooth HFP audio
    • Fixes Satellite Radio bleedthrough
    • Improves general functionality
    Download

ISGM655

Connect for Select GM Class II Vehicles

Installation Instructions

  • Save the .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to update your iSimple Connect.
  • Firmware Download, Version 192a.46a (Released on May 5th, 2014)
    Release Notes
    • Resolves intermittent audio issue seen when used with SXV200 tuner
    Download
  • Firmware Download, Version 187a.45d (Released on March 22nd, 2013)
    Release Notes
    • Adds Honda/Acura applications
    • Improves Bluetooth HFP audio
    • Fixes Satellite Radio bleedthrough
    • Improves general functionality
    Download

ISHD12

GateWay Sirius/XM Kit for SXV-100/200 Tuner

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISHD531

DuaLink Kit for Select Honda and Acura Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISHY572

GateWay Kit for Select Hyundai

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISMZ571

GateWay Kit for Mazda

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISNI531

DuaLink Kit for Select Nissan Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISNI532

DuaLink Kit for Select Nissan Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISNI571

GateWay Kit for Select Nissan

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISNI572

GateWay Kit for Select Nissan

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISNM71

GateWay for Select Nissan and Mazda

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISTY531

DuaLink Kit for Select Toyota Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISTY571

GateWay Kit for Toyota

Gateway Firmware Updater

The Gateway Firmware Updater will download the most recent firmware directly from iSimple. Ensuring you have the most up-to-date firmware with the most advanced features! A user manual is provided.

  • Download and install the latest version of the Gateway Update Software.
  • The program will walk you through step-by-step to upgrade your Gatway (internet connection is required for update)
  • NOTE: once installed the updater will download the most recent FIRMWARE from our servers
  • NOTE: The Firmware version may be different from the Gateway Updater version. You will see the most recent Firmware versions in the Gateway Updater Program once a connection to our server is made.
  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

ISTY651

Connect for Select Toyota Vehicles

Installation Instructions

  • Save the .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to update your iSimple Connect.
  • Firmware Download, Version 192a.46a (Released on May 5th, 2014)
    Release Notes
    • Resolves intermittent audio issue seen when used with SXV200 tuner
    Download
  • Firmware Download, Version 187a.45d (Released on March 22nd, 2013)
    Release Notes
    • Adds Honda/Acura applications
    • Improves Bluetooth HFP audio
    • Fixes Satellite Radio bleedthrough
    • Improves general functionality
    Download

ISVW532

DuaLink Kit for Select VW Vehicles

  • Firmware Download, Version 1.0.2.7F (Released on January 4th, 2012)
    Release Notes

    Gateway Update Software Package

    Contains updater program and user instructions

    Download

LCGM51

Radio Replacement Interface for Select General Motors Vehicles

  • Firmware Download, Version 1.1.4.3 (Released on March 20th, 2017)
    Release Notes
    • Adds 2016/2017 vehicle compatibility
    • Adds rear seat reminder chime
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater Application
    Download

LCGM52

Radio Replacement Interface for Select 2016-2017 GM Trucks

  • Firmware Download, Version 1.1.4.3 (Released on March 20th, 2017)
    Release Notes
    • Adds 2016/2017 vehicle compatibility
    • Adds rear seat reminder chime
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater Application
    Download

MCI-FD22

Multi-camera interface for select 2016 - 2017 Ford Transit 150, 250, 350, and 2015 - 2017 F-150

  • Utility/Other, Version V5 (Released on June 28th, 2017)
    Release Notes
    BCI PC Application
    Download

OS-2X

Radio Replacement Interface With OnStar Retention for Select GM Class II Vehicles with or without BOSE Sound System

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.1.1.5 (Released on January 19th, 2017)
    Release Notes
    • Adds support for SWI-CP2

    Download
  • Firmware Download, Version v1.1.3 (Released on April 24th, 2015)
    Release Notes
    • Fixes issue with SWC output not working
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

OS-5

Radio Replacement Interface

  • Firmware Download, Version 1.1.6.5 (Released on January 19th, 2017)
    Release Notes
    • Adds support for SWI-CP2
    Download
  • Firmware Download, Version 1.1.6.4 (Released on May 28th, 2014)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

PP-SWI

Hand-held portable SWC module programmer

Installation Notes

  • If not updated, download and install the PAC-UP firmware.
  • Download and install the latest version of our database.
  • Connect the PAC-UP to the computer's USB port and PP-SWI's data port, and install the update.

Detailed Instructions

  • If this is the first time updating you PP-SWI, download, run and install the "PAC Interface Updater". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to PP-SWI.
  • Download and extract the "PP-SWI Database r--.zip" file. Please remember the location that the .suf file is extracted to. We will need this for step 7.
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to PP-SWI.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select "PP-SWI" from "Interface select" pull down menu.
  • Click "Update Database". Locate the new database file you extracted in step 2 and select it.
  • Once the file is chosen the update will begin. When successful it will show the text "End Update". It is now safe to disconnect the PP-SWI / PAC-UP from the computer.
  • Firmware Download, Version r12 (Released on January 31st, 2014)
    Release Notes
    • Updated select vehicles to 2014 (select models) for Chrysler, Dodge, Jeep, VW, Kia, Hyundai, Subaru, Mazda, Mitsubishi, Harley, Honda, Acura, General Motors, Nissan, Infiniti, Suzuki, Ford and Lincoln.
    Download
  • Utility/Other, Version 1.1.7 (Released on March 5th, 2013)
    Release Notes
    PAC-UP Firmware
    Download

RP3-GM11

RadioPRO3 Interface for Select GM Class II Vehicles

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.1.7.5 (Released on January 19th, 2017)
    Release Notes
    • Adds support for the SWI-CP2
    Download
  • Firmware Download, Version 1.1.7.3 (Released on December 6th, 2013)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP3-GM12

RadioPRO3 Interface for Select GM Class II Vehicles

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.1.7.5 (Released on January 19th, 2017)
    Release Notes
    • Adds support for the SWI-CP2
    Download
  • Firmware Download, Version 1.1.7.3 (Released on December 6th, 2013)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP3-GM13

RadioPRO3 Interface for Select GM Class II Vehicles

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.1.1.2 (Released on January 26th, 2017)
    Release Notes
    • Adds support for the SWI-CP2
    Download
  • Firmware Download, Version 1.1.1.1 (Released on October 15th, 2014)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-AD11

RadioPRO4 Interface for Audi Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.4 (Released on February 3rd, 2015)
    Release Notes
    • Adds Fusion
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem without proper radio selection
    Download
  • Firmware Download, Version 1.2.3.3 (Released on May 14th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.3 (Released on January 30th, 2013)
    Release Notes
    • Adds support for Fusion radio.
    • Improves overall functionality
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Improves general functionality
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-CH11

RadioPRO4 Interface for Chrysler Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.4 (Released on February 13th, 2015)
    Release Notes
    • Adds Fusion
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Factory amp turn-on delay slightly longer to avoid turn-on pop
    • Fixes LED problem without proper radio selection
    Download
  • Firmware Download, Version 1.2.3.3 (Released on May 10th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    • Adds SWC support for Fusion radios
    • Fixes issues seen with reverse output on manual transmission vehicles
    • Fixes issues seen with turn on pop in vehicles with factory amplified systems
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Fixes reverse output falsely triggering when vehicle is in RAP mode.
    • Fixes digital amplifier not turning on in pre 2010 vehicles
    Download
  • Firmware Download, Version 1.1.1a (Released on April 14th, 2012)
    Release Notes
    • The reverse trigger falsely triggering when in RAP mode
    • Digital amplifiers not turning on in 2009 and earlier LSFT vehicles
    • Adds SWC text to multifunction display in cluster
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-CH21

RadioPRO4 Interface for Chrysler Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 5.1.2 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-FD11

RadioPRO4 Interface for Ford Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.5 (Released on June 23rd, 2015)
    Release Notes
    • Adds 2013-2016 Ford Super Duty applications

    Download
  • Firmware Download, Version 1.5.4.4 (Released on February 13th, 2015)
    Release Notes
    • Adds Fusion
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem without proper radio selection
    Download
  • Firmware Download, Version 1.2.3.3 (Released on May 10th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    • Fixes issues with Reverse, Parking Break, and Illumination not working in older vehicles
    • Adds re-calibration of OE Steering Wheel Controls to accommodate other vehicles and to improve SWC detection
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Fixes THX amplifier not turning on in 2012+ Lincoln Navigator
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-GM11

RadioPRO4 Interface for General Motors Vehicles with Class II Data bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.4.7.8 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    Download
  • Firmware Download, Version 1.3.7.6 (Released on September 19th, 2013)
    Release Notes
    • Improved chimes.
    • Seat belt chime improved on 2005 vehicles.
    • Fixes issues seen with illumination output when hi beams are on.
    • Improved SWC's on 2011-13 Corvette.
    • Adds Sony BT control.
    • Improves reliability in Hummer H2
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-GM31

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.2.3a.8 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.2.3a.4 (Released on May 29th, 2013)
    Release Notes
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.2a (Released on December 21st, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Firmware Download, Version 1.1.1d (Released on April 13th, 2012)
    Release Notes
    • Resolves intermittent factory amp turn-on issue
    Download
  • Firmware Download, Version 1.1.1c (Released on April 5th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-GM32

RadioPRO4 Interface for General Motors Vehicles with GM LAN 29 Bit Data bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.2.3a.8 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.2.3a.4 (Released on May 29th, 2013)
    Release Notes
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.2a (Released on December 21st, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-GM41

RadioPRO4 Interface for General Motors Vehicles with 29-Bit LAN v2

Installation Instructions

Download and install the latest version of PAC Vehicle Settings App PC Software

Detailed Instructions

  • Save the Vehicle Settings App .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to change your vehicle settings
  • Before installing firmware, it is very important that the second and third digit of the revision number on your module matches the second and third digit of the new file revision number. If your numbers do not match, please contact our tech support department.
  • Firmware Download, Version 1.2.3a.4 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Utility/Other, Version 2.0.8 (Released on October 12th, 2016)
    Release Notes

    PAC Vehicle Settings App (PC)

    Software designed to change the vehicle settings directly from a PC.

    • Added RP5-GM4101 compatibility
    Download

RP4-HD11

RadioPRO4 Interface for Select Honda Vehicles with MSCAN

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 5.1.3 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-MZ11

RadioPRO4 Interface for Mazda Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 5.4.4 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    • Fixes recognition issue in non-CAN vehicles
    Download
  • Firmware Download, Version 1.2.3.2 (Released on May 29th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    • Adds 2013 CX-9 compatibility
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-NI11

RadioPRO4 Interface for Nissan Vehicles with MSCAN

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 5.1.4 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    • Fixes LED problem without proper radio selection
    • Fixes issues seen with SWC text on DIC
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4-VW11

RadioPRO4 Interface for VW Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 5.1.5 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    Download
  • Firmware Download, Version 1.2.3.4 (Released on May 14th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.3 (Released on January 30th, 2013)
    Release Notes
    • Adds support for Fusion radio
    • Improves overall functionality
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Fixes volume down SWC not working in select pre 2007 vehicles
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP4.2-BM21

RadioPRO4 Radio Replacement Interface with Built-in Pre-Programmed Steering Wheel Control Retention and Navigation Outputs

Installation Instructions

  • Download the latest version of the RadioPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file from the .ZIP file that was just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the RadioPRO PC Application, run and install “RadioPRO_V6_Setup.exe”. This will install the PC Application onto the computer. The RadioPRO program will then install the update files from the computer to RP Interface.
  2. Download the firmware file.
  3. Set all four dipswitches to the on (down) position.
  4. Connect the RP4.2 interface to the computer using a standard to micro USB cable.
  5. Open the RadioPRO PC Application using the new shortcut created on your desktop.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 01.00.05 (Released on June 7th, 2016)
    Release Notes
    • Fixed chimes
    • Fixed VSS in 2015 cars
    • Added front park assist retention
    Download
  • Firmware Download, Version 01.00.03 (Released on August 5th, 2015)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V11 (Released on June 20th, 2017)
    Release Notes
    RadioPRO PC Application
    Download

RP4.2-HY11

RadioPRO4 Radio Replacement Interface for Select Hyundai Vehicles

Installation Instructions

  • Download the latest version of the RadioPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file from the .ZIP file that was just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the RadioPRO PC Application, run and install “RadioPRO_V6_Setup.exe”. This will install the PC Application onto the computer. The RadioPRO program will then install the update files from the computer to RP Interface.
  2. Download the firmware file.
  3. Set all four dipswitches to the on (down) position.
  4. Connect the RP4.2 interface to the computer using a standard to micro USB cable.
  5. Open the RadioPRO PC Application using the new shortcut created on your desktop.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 01.0.12 (Released on June 7th, 2016)
    Release Notes
    • Fixes issues seen with steering wheel controls.
    Download
  • Firmware Download, Version 01.0.11 (Released on June 5th, 2015)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V11 (Released on June 20th, 2017)
    Release Notes
    RadioPRO PC Application
    Download

RP4.2-HY12

RadioPRO4 Radio Replacement Interface for Select Hyundai Vehicles

Installation Instructions

  • Download the latest version of the RadioPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file from the .ZIP file that was just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the RadioPRO PC Application, run and install “RadioPRO_V6_Setup.exe”. This will install the PC Application onto the computer. The RadioPRO program will then install the update files from the computer to RP Interface.
  2. Download the firmware file.
  3. Set all four dipswitches to the on (down) position.
  4. Connect the RP4.2 interface to the computer using a standard to micro USB cable.
  5. Open the RadioPRO PC Application using the new shortcut created on your desktop.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 01.0.12 (Released on June 7th, 2016)
    Release Notes
    • Fixes issues seen with steering wheel controls.
    Download
  • Firmware Download, Version 01.0.11 (Released on June 5th, 2015)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V11 (Released on June 20th, 2017)
    Release Notes
    RadioPRO PC Application
    Download

RP4.2-TY11

RadioPRO Radio Replacement Interface Designed for Select 2001-2016 Toyota, Lexus, and Scion vehicle models

Installation Instructions

  • Download the latest version of the RadioPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file from the .ZIP file that was just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the RadioPRO PC Application, run and install “RadioPRO_V6_Setup.exe”. This will install the PC Application onto the computer. The RadioPRO program will then install the update files from the computer to RP Interface.
  2. Download the firmware file.
  3. Set all four dipswitches to the on (down) position.
  4. Connect the RP4.2 interface to the computer using a standard to micro USB cable.
  5. Open the RadioPRO PC Application using the new shortcut created on your desktop.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version 1.1.1.34 (Released on April 5th, 2017)
    Release Notes
    Fixes upper display and amplifier turn on issues seen in the Toyota Avalon with Nav.
    Download
  • Firmware Download, Version 1.1.1.33 (Released on July 20th, 2016)
    Release Notes
    Fixes upper display issues seen in the Toyota Avalon with or without JBL.
    Download
  • Firmware Download, Version 01.00.32 (Released on July 14th, 2016)
    Release Notes
    • Fixes turn on issues seen with JBL amplifiers.
    Download
  • Firmware Download, Version 01.00.21 (Released on December 29th, 2015)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V11 (Released on June 20th, 2017)
    Release Notes
    RadioPRO PC Application
    Download

RP5-GM11

RadioPRO Radio Replacement Interface for Select General Motors Vehicles

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.2.6.8 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    Download
  • Firmware Download, Version 1.2.6.6 (Released on September 19th, 2013)
    Release Notes
    • Fixes issues with chimes seen in LaCrosse and Corvette
    • Fixes parking brake output in LaCrosse
    Download
  • Firmware Download, Version 1.2.5.4 (Released on July 24th, 2013)
    Release Notes
    • Corrects no OnStar audio in non-premium amplified vehicles
    • Improves seat belt chimes in 2005 and newer vehicles
    • Corrects illumination output trigger when Hi-beams are on
    • Improves steering wheel controls general operation
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP5-GM31

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Pre- Programmed SW Control Retention and Navigation Outputs

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.6.6.17 (Released on June 1st, 2016)
    Release Notes
    • Fixed Aftermarket mode for SWC programming
    Download
  • Firmware Download, Version 1.6.6.16 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.4.4a.4m (Released on April 17th, 2013)
    Release Notes
    • Fixes issues seen with interface shutting down every 10 minutes due to OnStar update
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.4.4c (Released on January 30th, 2013)
    Release Notes
    • Fixes issues seen with SWC when vehicle is moving
    Download
  • Firmware Download, Version 1.4.4 (Released on December 18th, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Firmware Download, Version 1.4.3g (Released on November 30th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP5-GM32

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.6.6.17 (Released on June 1st, 2016)
    Release Notes
    • Fixed Aftermarket mode for SWC programming
    Download
  • Firmware Download, Version 1.6.6.16 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.6.6.14 (Released on September 17th, 2013)
    Release Notes
    • Adds short press/long press dual command functionality
    • Improves SWC Factory/Aftermarket Mode selection
    • Adds Sony Bluetooth command SWC support (Hardware rev. 6 only)
      Fixes issues seen with OnStar volume control from the SWC
    Download
  • Firmware Download, Version 1.4.4a.4m (Released on April 17th, 2013)
    Release Notes
    • Fixes issues seen with interface shutting down every 10 minutes due to OnStar update
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.4.4c (Released on January 30th, 2013)
    Release Notes
    • Fixes issues seen with SWC when vehicle is moving
    Download
  • Firmware Download, Version 1.4.4 (Released on December 18th, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Firmware Download, Version 1.4.3g (Released on November 30th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

RP5-GM41

RadioPRO Radio Replacement Interface with Built-in OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

Installation Instructions

Download and install the latest version of PAC Vehicle Settings App PC Software

Detailed Instructions

  • Save the Vehicle Settings App .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to change your vehicle settings
  • Before installing firmware, it is very important that the second and third digit of the revision number on your module matches the second and third digit of the new file revision number. If your numbers do not match, please contact our tech support department.
  • Firmware Download, Version 1.5.6.6 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.4.4a.3 (Released on May 22nd, 2013)
    Release Notes
    • Fixes issues seen with SWC when vehicle is in motion
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download
  • Utility/Other, Version 2.0.8 (Released on October 12th, 2016)
    Release Notes

    PAC Vehicle Settings App (PC)

    Software designed to change the vehicle settings directly from a PC.

    • Added RP5-GM4101 compatibility
    Download

RP5-GM51

RadioPRO Radio Replacement Interface With Built-in OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

Installation Instructions

Download and install the latest version of PAC Vehicle Settings App PC Software

Detailed Instructions

  • Save the Vehicle Settings App .zip file to your desktop.
  • Once saved to your desktop, right click the .zip file and choose "Extract All".
  • Follow the instructions included in the .zip file to change your vehicle settings
  • Before installing firmware, it is very important that the second and third digit of the revision number on your module matches the second and third digit of the new file revision number. If your numbers do not match, please contact our tech support department.
  • Firmware Download, Version 1.1.6 (Released on March 20th, 2017)
    Release Notes
    • Adds 2016/2017 vehicle compatibility
    • Adds Sony and Clarion VR support
    Download
  • Firmware Download, Version 1.1.4 (Released on February 13th, 2015)
    Release Notes
    • Added GM-LAN SWC for Colorado
    • Added Alpine VR command
    • Added auto defog settingg for Tahoe
    Download
  • Firmware Download, Version 1.1.3 (Released on May 6th, 2014)
    Release Notes
    • Added 2015 Tahoe/Suburban/Yukon compatibility
    Download
  • Utility/Other, Version 2.6 (Released on July 14th, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download
  • Utility/Other, Version 2.0.11 (Released on March 20th, 2017)
    Release Notes

    PAC Vehicle Settings App (PC)

    Software designed to change the vehicle settings directly from a PC.

    • Adds new vehicle settings
    Download

RPK5-GM4101

Chevrolet Camaro Integrated Radio Replacement Kit

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 6 (Released on July 3rd, 2017)
    Release Notes
    • Fixes issues seen with HVAC board becoming inoperable
    • This firmware is for the HVAC board in the dash kit
    Download
  • Firmware Download, Version 1.5.6.3 (Released on October 12th, 2016)
    Release Notes
    • Fixes issues seen with remapping SWC
    • This firmware is for the RP5 interface
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    • PAC-UP Interface Updater Application
    • Software used to update RP5 interface
    Download
  • Utility/Other, Version 11 (Released on July 3rd, 2017)
    Release Notes
    • RadioPRO PC Application
    • Software used to update HVAC board in dash kit
    Download
  • Utility/Other, Version 2.0.8 (Released on October 12th, 2016)
    Release Notes
    • PAC Vehicle Settings App (PC)
    • Software used to change the vehicle settings directly from a PC
    Download