Products

RadioPRO 3 Radio Replacement Interface for select Toyota vehicles

$119.00 RP3.2-TY11
Select 2003 - 2017 Toyota vehicles

RP3.2-TY11

RadioPRO 3 Radio Replacement Interface for select Toyota vehicles

INSTALLATION INSTRUCTIONS

  1. If this is the first time using the RadioPRO PC Application, download “radiopro_setup.zip”.
  2. Download the firmware file.
  3. Extract the Radio PRO PC Application file, then run the installer. This will install the PC Application onto the computer.
  4. Open the RadioPRO PC Application using the new shortcut created on your desktop.
  5. Connect the interface to the computer using a standard to micro USB cable.
  6. Click the "Firmware" icon.
  7. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  8. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".


  • Firmware Download, Version V4 (Released on September 28th, 2017)
    Release Notes
    -Added missing amp turn on message for IEBus
    -Fixed avalon with nav and 2nd gen prius (latency of startup with BL and hanging on screen init)
    -Linker file adjusted for RAM
    Download
  • Utility/Other, Version V17 (Released on February 22nd, 2020)
    Release Notes
    RadioPRO PC Application
    Download

The RP3.2-TY11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in select 2003 - 2017 Toyota vehicles. RP3.2-TY11 works with your vehicle’s databus system to retain the factory JBL amplifier, speaker fade adjustment by a dial, and the 3.5mm AUX input. PAC quality and engineering provides you the most professional installation solution available!


Retains:
Factory JBL amplifier
3.5mm AUX input
Speaker fade adjustment by dial

Features:
Direct USB updatability
10 Amp accessory output

Additional Options:
Retain steering wheel controls - requires PAC SWI-CP2 or SWI-RC
Retain USB port - requires PAC USB-TY1 or USB-TY2
Retain reverse camera function - requires PAC CAM-TY11 or CAM-TY12

RP3.2-TY11 Instruction Manual
Rev. 2
 Download (814.04k)