• Radio Replacement

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

RP5-GM32

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

$279.95

RP5-GM32

New product

LAN 29 2012-2013 PU/SUV w/NAV

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Steering Wheel Control Retention and Navigation Outputs View larger

An all in one radio replacement and SWC interface, the innovative new RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation based output signals and other features that save time and money during installation.

  • Retains steering wheel controls (pre-programmed)
  • Retains OnStar® when the factory radio is replaced
  • Retains factory Bluetooth (2009+ model vehicles)
  • Retains rear seat audio controls
  • Retains all warning chimes (chime module included)
  • Retains back-up sensors/park assist
  • Retains factory Bose audio systems
  • Retains factory premium Bose audio (Y91 digital. does not support fading)
  • Retains factory reverse camera
  • Dual zone function
  • Chime volume adjustment (factory buttons)
  • Rear seat audio and video (GMRVD2) required
  • OnStar volume adjust from steering wheel controls
  • OnStar volume adjustment
  • Retained accessory power output (RAP)
  • Reverse wire output
  • VSS (Vehicle Speed Sense) output
  • Illumination output
  • Parking brake output
  • Includes antenna adaptor
  • Retains lane departure warning system
  • Retains OnStar Turn-by-Turn voice prompts
Compatibility Notes
  • For use in the following vehicles:
    • All 2012-2013 GM trucks and SUVs equipped with factory navigation radios
    • 2012+ 2500 & 3500 trucks equipped with factory navigation radios
  • 2012-2013 GM trucks & SUVs equipped with factory non-navigation radios must use the RP5-GM31
  • 2012+ 2500 & 3500 trucks equipped with factory non-navigation radios must use the RP5-GM31
  • 2014+ Silverado & Sierra 1500 series trucks must use the RP5-GM51
  • In Premium Amplified Systems there will be no fading capability of the aftermarket stereo
  • Does not retain factory XM tuner. This is built into the factory radio and is removed when the radio is removed.
  • Sony Bluetooth SWC commands are only supported with revision 1.6.6.14 or higher

Check for the latest firmware


Product Revision History

Current Revision #: 1.6.6.16  Description: Adds Alpine VR Command, Separates Sony and Pioneer, Fixed erratic led behavior when using SWCRelease Date: 2-13-15

Revision #: 1.6.6.14  Description: Adds short press long press dual command functionality, factory or aftermarket mode for SWC, new bootloader, minor hardware change, Adds Sony Bluetooth command SWC support, Fixes issues seen with OnStar volume control from the SWC   Release Date: 09-23-13

Revision #: 1.5.6.8  Description: Audio hardware upgrade and universal bootloader implemented   Release Date: 04-19-13

Revision #: 1.4.4a.4m  Description: Fixes issue seen with interface shutting down every 10 minutes due to OnStar update. Fixes issues seen with SWC when used with new Alpine & JVC head units. Adds new Kenwood Bluetooth function support for SWC.   Release Date: 04-17-13

Revision #: 1.4.4a.4d  Description: Fixes issues seen with SWC when used with new Alpine head units   Release Date: 03-20-13 

Revision #: 1.4.4c  Description: Fixes issues seen with SWC while the vehicle is moving   Release Date: 1-30-13

Revision #: 1.4.4  Description: Improves chime tone and reliability of default SWC programming   Release Date: 12-21-12

Revision #: 1.4.3g Description: Initial Release

RP5-GM32 Instruction Manual
 Download (1.04M)
RP5 Accessory Power Tech Brief
No accessory power output
 Download (1.03M)
Year(s) Make Model Trim Level Additional Info
2012-2013 CHEVROLET AVALANCHE ALL TRIM LEVELS
2012-2014 CHEVROLET SILVERADO ALL TRIM LEVELS
2014 CHEVROLET SILVERADO HD ALL TRIM LEVELS
2012-2014 CHEVROLET SUBURBAN ALL TRIM LEVELS
2012-2014 CHEVROLET TAHOE ALL TRIM LEVELS
2012-2014 GMC SIERRA ALL TRIM LEVELS
2012-2014 GMC SIERRA HD ALL TRIM LEVELS
2012-2014 GMC YUKON ALL TRIM LEVELS

RP5-GM32

RadioPRO Radio Replacement Interface with Built-In OnStar Retention, Steering Wheel Control Retention and Navigation Outputs

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.6.6.17 (Released on June 1st, 2016)
    Release Notes
    • Fixed Aftermarket mode for SWC programming
    Download
  • Firmware Download, Version 1.6.6.16 (Released on February 13th, 2015)
    Release Notes
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem when using SWC
    Download
  • Firmware Download, Version 1.6.6.14 (Released on September 17th, 2013)
    Release Notes
    • Adds short press/long press dual command functionality
    • Improves SWC Factory/Aftermarket Mode selection
    • Adds Sony Bluetooth command SWC support (Hardware rev. 6 only)
      Fixes issues seen with OnStar volume control from the SWC
    Download
  • Firmware Download, Version 1.4.4a.4m (Released on April 17th, 2013)
    Release Notes
    • Fixes issues seen with interface shutting down every 10 minutes due to OnStar update
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.4.4c (Released on January 30th, 2013)
    Release Notes
    • Fixes issues seen with SWC when vehicle is moving
    Download
  • Firmware Download, Version 1.4.4 (Released on December 18th, 2012)
    Release Notes
    • Improves chime tone and reliability of default SWC programming
    Download
  • Firmware Download, Version 1.4.3g (Released on November 30th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download