Products

RadioPRO4 Interface for VW Vehicles with CAN bus

$249.00 RP4-VW11

All-in-one radio replacement and SWC interface

  • 2002-2005 Vehicles: In these year vehicles the RP4-VW11 does not provide a Reverse output trigger. This signal is unavailable on the data bus. You must be replacing a factory Double-DIN radio. If the vehicle came equipped with a Single-DIN radio, the RP4-VW11 is not compatible.
  • 2004-2007 Touareg: Does not retain amplified system when the vehicles is equipped with factory navigation radio
  • In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo.

RP4-VW11

RadioPRO4 Interface for VW Vehicles with CAN bus

Installation Instructions

It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, download and install "PAC-UP Interface Updater". This will install the necessary software to update the firmware on the RP Interface. This can be found at in the "Download" tab at the very bottom of the firmware list on this page.
  • Download the firmware file to a location on your computer that you can easily find.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Click the "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, disconnect the PAC-UP from the computer, restart the software, then reconnect the PAC-UP and try again.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second from last digit of the revision number on your module matches the second from last digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.7 (Released on May 9th, 2018)
    Release Notes
    • Adds default functions for "Voice" button on SWC to launch Siri or the Google equivalent
    Download
  • Firmware Download, Version 1.5.4.6 (Released on February 13th, 2015)
    Release Notes
    • Adds Alpine VR command
    Download
  • Firmware Download, Version 1.2.3.4 (Released on May 14th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.3 (Released on January 30th, 2013)
    Release Notes
    • Adds support for Fusion radio
    • Improves overall functionality
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Fixes volume down SWC not working in select pre 2007 vehicles
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download

All in one radio replacement and SWC interface, the innovative RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.

  • Retains steering wheel controls (pre-programmed)
  • Data controlled accessory and navigation outputs
  • Retains all factory amplified systems (Dynaudio & Fender)
  • Provides factory RSE activation
  • Provides VSS and Illumination outputs

Patent # 8,014,540 & 8,184,825

RP4-VW11 Instruction Manual
Rev. 091216 ***These only apply to rev. 1.5.4.6 or lower***
 Download (574.29k)
RP4-VW11 Instruction Manual
Rev. 5 ***These only apply to rev. 1.5.4.7***
 Download (568.29k)