• Radio Replacement

RadioPRO4 Interface for Chrysler Vehicles with CAN bus

RP4-CH11

RadioPRO4 Interface for Chrysler Vehicles with CAN bus

$219.95

RP4-CH11

New product

LSFT and MS CAN

RadioPro Radio Replacement Interface With Built In Pre-Programmed Steering Wheel Control Retention and Navigation Outputs View larger

An all in one radio replacement and SWC interface, the innovative new RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.

  • Retains steering wheel controls (pre-programmed)
  • Data controlled accessory and navigation outputs¬†
  • Retains factory amplifier
  • Rear seat audio and video (CHYRVD harness required)
  • Factory RSE activation
  • 12V ACC output (RAP)
  • Vehicle Speed Sense (VSS)
  • Illumination
  • Reverse trigger
  • Parking brake output

Compatibility Notes
  • Does not retain uConnect
  • In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo.

Patent # 8,014,540 & 8,184,825


RP4-CH11
 Download (560.55k)
Year(s) Make Model Trim Level Additional Info
2011-2014 CHRYSLER 200 ALL TRIM LEVELS
2005-2010 CHRYSLER 300 ALL TRIM LEVELS
2007-2009 CHRYSLER ASPEN ALL TRIM LEVELS
2007-2010 CHRYSLER PT CRUISER ALL TRIM LEVELS
2007-2010 CHRYSLER SEBRING ALL TRIM LEVELS
2008-2016 CHRYSLER TOWN & COUNTRY ALL TRIM LEVELS
2007-2014 DODGE AVENGER ALL TRIM LEVELS
2006-2012 DODGE CALIBER ALL TRIM LEVELS
2008-2014 DODGE CHALLENGER ALL TRIM LEVELS
2006-2010 DODGE CHARGER ALL TRIM LEVELS
2010-2011 DODGE DAKOTA ALL TRIM LEVELS
2004-2009,2011-2013 DODGE DURANGO ALL TRIM LEVELS
2009-2016 DODGE GRAND CARAVAN ALL TRIM LEVELS
2009-2010 DODGE JOURNEY ALL TRIM LEVELS
2005-2008 DODGE MAGNUM ALL TRIM LEVELS
2007-2010 DODGE NITRO ALL TRIM LEVELS
2006-2008 DODGE RAIDER ALL TRIM LEVELS
2006-2012 DODGE RAM TRUCK ALL TRIM LEVELS
2007-2016 JEEP COMPASS ALL TRIM LEVELS
2005-2013 JEEP GRAND CHEROKEE ALL TRIM LEVELS
2008-2013 JEEP LIBERTY ALL TRIM LEVELS
2007-2016 JEEP PATRIOT ALL TRIM LEVELS
2007-2017 JEEP WRANGLER ALL TRIM LEVELS
2007-2017 JEEP WRANGLER UNLIMITED ALL TRIM LEVELS
2009 MITSUBISHI RAIDER ALL TRIM LEVELS
2009-2013 VOLKSWAGEN ROUTAN ALL TRIM LEVELS

RP4-CH11

RadioPRO4 Interface for Chrysler Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.4 (Released on February 13th, 2015)
    Release Notes
    • Adds Fusion
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Factory amp turn-on delay slightly longer to avoid turn-on pop
    • Fixes LED problem without proper radio selection
    Download
  • Firmware Download, Version 1.2.3.3 (Released on May 10th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    • Adds SWC support for Fusion radios
    • Fixes issues seen with reverse output on manual transmission vehicles
    • Fixes issues seen with turn on pop in vehicles with factory amplified systems
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Fixes reverse output falsely triggering when vehicle is in RAP mode.
    • Fixes digital amplifier not turning on in pre 2010 vehicles
    Download
  • Firmware Download, Version 1.1.1a (Released on April 14th, 2012)
    Release Notes
    • The reverse trigger falsely triggering when in RAP mode
    • Digital amplifiers not turning on in 2009 and earlier LSFT vehicles
    • Adds SWC text to multifunction display in cluster
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download