• Radio Replacement

RadioPRO4 Interface for Audi Vehicles with CAN bus

RP4-AD11

RadioPRO4 Interface for Audi Vehicles with CAN bus

$219.95

RP4-AD11

New product

Audi Vehicles with CAN bus

RadioPRO4 Interface for Audi Vehicles with CAN bus View larger

An all in one radio replacement and SWC interface, the innovative new RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.

  • Retains steering wheel controls (pre-programmed)
  • Data controlled accessory and navigation outputs
  • Retains factory amplifier

Provides:

  • Factory RSE activation
  • 12V ACC output (RAP)
  • Vehicle Speed Sense (VSS)
  • Illumination
  • Reverse trigger

NOTE: Does not support fading in Premium Amplified


Product Revision History

Current Revision #: 1.5.4.4 Description: Adds Fusion, Separates Sony and Pioneer, Adds Alpine VR Command, Fixes swc led not blinking if a proper radio selection is not made Release Date: 2-13-15

Revision #: 1.5.4.3 Description: Hardware & Bootloader update Release Date: 4-11-14

Revision #: 1.2.3.3 Description: Adds short press long press dual command functionality for SWC, fixes issues seen with SWC when used with new Alpine & JVC head units, adds new Kenwood Bluetooth function support for SWC. Release Date: 5-14-13

Revision #: 1.1.3 Description: Adds support for Fusion radios, Improves General Functionality

Revision #: 1.1.2 Description: Improves General Functionality

Revision #: 1.1.1 Description: Initial Release


Patent # 8,014,540 & 8,184,825

RP4-AD11 Instruction Manual
 Download (555.6k)
Year(s) Make Model Trim Level Additional Info
2008-2010 AUDI A3 ALL TRIM LEVELS
2004-2009 AUDI A4 ALL TRIM LEVELS
2004 AUDI A6 ALL TRIM LEVELS
2008-2015 AUDI TT ALL TRIM LEVELS

RP4-AD11

RadioPRO4 Interface for Audi Vehicles with CAN bus

Installation Instructions

If not updated, download and install the latest version of the PAC-UP firmware. It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software. 

Detailed Instructions

  • If this is the first time, run and install "Interface Updater Setup". This will install "Interface Updater" onto the computer. The "Interface Updater" will update the files from the computer to RP Interface.
  • Download the file
  • Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface.
  • Open the Interface Updater Program by going to Start >All Programs >AAMP of America > Interface Updater.
  • Click "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, reconnect PAC-UP to the computer and restart the software.
  • Select your RP Interface from the "Interface select" pull down menu.
  • Click "Update firmware". The new firmware can be found where you saved it before beginning.
  • Once the files are chosen the update will begin. When successful it will show the text "End Update".

IMPORTANT: It is very important that the second and third digit of the revision number on your module matches the second and third digit of the new firmware file revision number. If your numbers do not match, please contact our tech support department.

  • Firmware Download, Version 1.5.4.4 (Released on February 3rd, 2015)
    Release Notes
    • Adds Fusion
    • Separates Sony & Pioneer
    • Adds Alpine VR command
    • Fixes LED problem without proper radio selection
    Download
  • Firmware Download, Version 1.2.3.3 (Released on May 14th, 2013)
    Release Notes
    • Adds short press long press dual command functionality for SWC
    • Fixes issues seen with SWC when used with new Alpine & JVC head units
    • Adds new Kenwood Bluetooth function support for SWC
    Download
  • Firmware Download, Version 1.1.3 (Released on January 30th, 2013)
    Release Notes
    • Adds support for Fusion radio.
    • Improves overall functionality
    Download
  • Firmware Download, Version 1.1.2 (Released on June 4th, 2012)
    Release Notes
    • Improves general functionality
    Download
  • Firmware Download, Version 1.1.1 (Released on April 5th, 2012)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version 2.6 (Released on July 21st, 2017)
    Release Notes
    PAC-UP Interface Updater
    Download