• Audio Interfacing

AmpPRO 4

AP4-CH31

AmpPRO 4

AP4-CH31

New product

This product is no longer in stock
Select 2011 - 2015 Chrysler, Dodge, Jeep and RAM with amplified sound systems
AmpPRO 4 View larger

AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.


Compatibility Note: This product is compatible with data-bus controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.


Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution

Features
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)

Includes
AmpPRO module
22-pin harness (Dual MS CAN)
Bass knob
Knob harness
Manual

How it works:

AP4-CH31 Instruction Manual
Rev. 020717 ***Only applicable to revision 1.1.1.1 firmware on AP4-CH31***
 Download (747.19k)
AP4-CH31 Instruction Manual
Rev. 070717 ***Only applicable to revision 1.1.1.3 firmware on AP4-CH31***
 Download (746.57k)
Year(s) Make Model Trim Level Additional Info
2011-2014 CHRYSLER 300 ALL TRIM LEVELS
2011-2014 DODGE CHARGER ALL TRIM LEVELS
2011-2015 DODGE JOURNEY ALL TRIM LEVELS
2014 MASERATI QUATTROPORTE ALL TRIM LEVELS

AP4-CH31

AmpPRO 4

Installation Instructions

  • Download the latest version of the AmpPRO PC Application. It is VERY important that you use the latest version.
  • Download the latest version of our firmware.
  • Extract the firmware file and setup file from the .ZIP files that were just downloaded.
  • Connect the interface to the computer's USB port and install the update.

Detailed Instructions

  1. If this is the first time using the AmpPROPC Application, run and install “ampproexe”. This will install the PC Application onto the computer. The AmpPRO program will then install the update files from the computer to the interface.
  2. Open the AmpPROPC Application using the new shortcut created on your desktop.
  3. Connect the interface to the computer using a standard to micro USB
  4. Click the "Firmware" icon.
  5. Click “Select File” and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
  6. Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
  • Firmware Download, Version V3 (Released on August 11th, 2017)
    Release Notes
    • Adds “Two Channel Mode” on Dip1
    • Reduces audio delay from ~14ms to ~1ms
    Download
  • Firmware Download, Version V1 (Released on February 2nd, 2017)
    Release Notes
    • Initial Release
    Download
  • Utility/Other, Version V10 (Released on June 27th, 2017)
    Release Notes
    AmpPRO PC Application
    Download